Downloads

         Combustion Monitor
             Datasheet

                         TDL100-CS

         Detectable Gases

                          TDLGases

• Features
  
    TDL100-CS is a cross stack gas monitor
    Measurements are free from interference by other
      gases
    In-situ measurement, no sampling lines
    Fast response (2s)
    Option for simultaneous O₂ measurement with same
      instrument. No need for additional Zirconia probe
      installation
    Reliable, very low maintenance
    Operates under high dust loads

The TDL100-CS can be configured for O₂ or CO.

New!
A multi-laser option is available using the same instrument for multi-gas measurements such as O₂ + CO and O₂ + CO + CO₂.

In addition, the TDL100-CS can also make in-situ temperature measurements using either an O₂ line or, for high accuracy measurements, a H₂O line combination.

The optics are protected by a reliable, high efficiency purging system to protect against harsh environments and high dust loads.

 

Gas	Detection limit*	Max T (oC)
O2	0.02 %	1500
NH3	0.2 ppm	500
HCl	0.1 ppm	400
HF	0.05 ppm	400
H2O	0.15 ppm	1500
CO	1 ppm	1500
CO2	1 ppm	1500
CH4	1 ppm	300
H2S	15 ppm	300
NO NO (mid-IR)	30 ppm 100 ppb (new)	300
SO2 (mid-IR)	1 ppm (new)	500
N2O	40 ppm	200
HCN	2.5 ppm	300
Call for other options. *Defined for 1m path, 296K, 1 bar. Limit depends on individual installation.** Lower detection limit option available.